Home
Brands
PRIVATE JOINT-STOCK COMPANY “WEIGHTING AGENTS PLANT”

PRIVATE JOINT-STOCK COMPANY “WEIGHTING AGENTS PLANT”

Sort by:

Filter

Special Cements TsTPN 25 kg.

Special Cements TsTPN 25 kg.

Article: ЦТПН 25

0,00 грн

0,00 грн

Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.

- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.

- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97

Special Cements UShTS -1-120 kg.

Special Cements UShTS -1-120 kg.

Article: УШЦ -1-120-25

0,00 грн

0,00 грн

Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.

- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.

- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97

Special Cements UShTS-1-200 kg.

Special Cements UShTS-1-200 kg.

Article: УШЦ -1-200-25

0,00 грн

0,00 грн

Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.

- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.

- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97

Special Cements UShTS -2-200 25 kg.

Special Cements UShTS -2-200 25 kg.

Article: УШЦ -2-200-25

0,00 грн

0,00 грн

Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.

- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.

- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97

Special Cements CTO 1,5-100 25 kg.

Special Cements CTO 1,5-100 25 kg.

Article: ЦТО 1,5-100-25

0,00 грн

0,00 грн

Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.

- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.

- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97

Special Cements PCT-III-Pol 5-100 25 kg.

Special Cements PCT-III-Pol 5-100 25 kg.

Article: ПЦТ-III-Пол 5-100-25

0,00 грн

0,00 грн

Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.

- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.

- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97

Special Cements ShPCS-120 25 kg.

Special Cements ShPCS-120 25 kg.

Article: ШПЦС-120-25

0,00 грн

0,00 грн

Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.

- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.

- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97

Special Cements PCT-I- 100 25 kg.

Special Cements PCT-I- 100 25 kg.

Article: ПЦТ-I-100-25

0,00 грн

0,00 грн

Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.

- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.

- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97

Special Cements PCT-II- 50 25 kg.

Special Cements PCT-II- 50 25 kg.

Article: ПЦТ-II- 50-25

0,00 грн

0,00 грн

Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.

- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.

- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97

Special Cements ShPCS-200 25 kg.

Special Cements ShPCS-200 25 kg.

Article: ШПЦС-200-25

0,00 грн

0,00 грн

Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.

- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.

- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97

Drilling Fluid Powders/PBMА-20 - 25 kg.

Drilling Fluid Powders/PBMА-20 - 25 kg.

Article: ПБМА-20-25

0,00 грн

0,00 грн

Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.

Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.

Packing: bag weighing 25 ± 1% kg.

The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.

Drilling Fluid Powders/PBMB-16 - 25 kg.

Drilling Fluid Powders/PBMB-16 - 25 kg.

Article: ПБМБ-16-25

0,00 грн

0,00 грн

Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.

Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.

Packing: bag weighing 25 ± 1% kg.

The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.

Drilling Fluid Powders/PBMB-18 (4,0) - 25 kg.

Drilling Fluid Powders/PBMB-18 (4,0) - 25 kg.

Article: ПБМБ-18 (4,0)-25

0,00 грн

0,00 грн

Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.

Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.

Packing: bag weighing 25 ± 1% kg.

The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.

Drilling Fluid Powders/PBMB-18 (2,5) - 25 kg.

Drilling Fluid Powders/PBMB-18 (2,5) - 25 kg.

Article: ПБМБ-18 (2,5)-25

0,00 грн

0,00 грн

Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.

Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.

Packing: bag weighing 25 ± 1% kg.

The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.

Drilling Fluid Powders/PBMB Big-Bag 1000 kg.

Drilling Fluid Powders/PBMB Big-Bag 1000 kg.

Article: ПБМВ

0,00 грн

0,00 грн

Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.

Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.

Packaging containers soft propylene type "big-bag" for single use weighing 1000 ± 1% kg

The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.

Drilling Fluid Powders/PBMА-20 Big-Bag 1000 kg.

Drilling Fluid Powders/PBMА-20 Big-Bag 1000 kg.

Article: ПБМА-20

0,00 грн

0,00 грн

Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.

Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.

Packaging containers soft propylene type "big-bag" for single use weighing 1000 ± 1% kg

The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.

Drilling Fluid Powders/PBMB-16 Big-Bag 1000 kg.

Drilling Fluid Powders/PBMB-16 Big-Bag 1000 kg.

Article: ПБМБ-16

0,00 грн

0,00 грн

Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.

Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.

Packaging containers soft propylene type "big-bag" for single use weighing 1000 ± 1% kg

The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.

Drilling Fluid Powders/PBMB-18 (4,0) Big-Bag 1000 kg.

Drilling Fluid Powders/PBMB-18 (4,0) Big-Bag 1000 kg.

Article: ПБМБ-18 (4,0)

0,00 грн

0,00 грн

PBMB-18 (4.0). Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.

Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.

Packaging containers soft propylene type "big-bag" for single use weighing 1000 ± 1% kg

The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.

Official site: www.kzu.com.ua

Drilling Fluid Powders/ PBMB-18 (2.5) Big-Bag 1000 kg.

Drilling Fluid Powders/ PBMB-18 (2.5) Big-Bag 1000 kg.

Article: ПБМБ-18 (2,5)

0,00 грн

0,00 грн

Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.

Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.

Packaging containers soft propylene type "big-bag" for single use weighing 1000 ± 1% kg

The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.

100% quality guarantee

100% quality guarantee

14 days for return

14 days for return

Nationwide delivery

Nationwide delivery

Pickup

Pickup