PRIVATE JOINT-STOCK COMPANY “WEIGHTING AGENTS PLANT”
Mineral powder is a stone flour or dust obtained by grinding non-carbonate rocks and industrial waste. It is used as an integral part in asphalt concrete, crushed stone-mastic and dry construction mixes, serves as a filler which provides structure, viscosity, strengthens gluing ability, plasticity, elasticity and durability.
Mineral powder is a stone flour or dust obtained by grinding non-carbonate rocks and industrial waste. It is used as an integral part in asphalt concrete, crushed stone-mastic and dry construction mixes, serves as a filler which provides structure, viscosity, strengthens gluing ability, plasticity, elasticity and durability.
Clay molding bentonite powdered activated P1T1KA brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powder activated of the P1T1KA brand (the highest grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite activated lump of the P4T1K brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated P1T1KA brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powder activated of the P1T1KA brand (the highest grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite activated lump of the P4T1K brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated P1T1KA brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powder activated of the P1T1KA brand (the highest grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite activated lump of the P4T1K brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated P1T1KA brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powder activated of the P1T1KA brand (the highest grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite activated lump of the P4T1K brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated P1T1KA brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powder activated of the P1T1KA brand (the highest grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite activated lump of the P4T1K brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated P1T1KA brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powder activated of the P1T1KA brand (the highest grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite activated lump of the P4T1K brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated P1T1KA brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powder activated of the P1T1KA brand (the highest grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite activated lump of the P4T1K brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated P1T1KA brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powder activated of the P1T1KA brand (the highest grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite activated lump of the P4T1K brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated P1T1KA brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powder activated of the P1T1KA brand (the highest grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite activated lump of the P4T1K brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated P1T1KA brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powder activated of the P1T1KA brand (the highest grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite activated lump of the P4T1K brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated P1T1KA brand according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powder activated of the P1T1KA brand (the highest grade) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite powdered activated brand P1T1KA (1 grade fine grinding) according to (TU U 08.1-00136751-002: 2020)
Clay molding bentonite activated lump of the P4T1K brand according to (TU U 08.1-00136751-002: 2020)
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Special grouting cements are used to strengthen oil and gas wells - cementing casing pipes (strings).
The main brands of special cements:
- Weighted slag backfill cements of the type: UShTs 1-120, UShTs 1-200, UShTs 2-200 (TU U 320.00136751.010-96):
Weighted slag backfill cements of the UShTs type are intended for cementing oil and gas wells with reservoir temperatures from 80 to 250 ° C, with abnormally high (up to 600 Atm) pressures, including for isolation of saline deposits.
- Weighted backfill cements of the type: TsTU 1-100 and TsTU 2-100 (TU U 320.00136751.022-97):
They are used for cementing oil and gas wells with moderate temperatures (up to 100 ° C) and in the presence of zones of abnormally high reservoir pressures, installation of cement bridges for various technological purposes, including for isolation of salt deposits.
- Lightweight backfill cement type TSTO 1.5-100 (TU U 320.00136751.021-97):
Designed for cementing oil and gas wells within the temperature range from 50 to 100 ° C, overburden zones with abnormally low hydraulic fracturing pressure gradients. The use of CTO allows high-quality cementing of wells with difficult geological conditions and, if necessary, ensures the rise of the cement slurry to a great height by one degree.
- Slag-sand cements of the ShPTsS-120 and ShPTsS-200 types (TU U 320.00136751.008-96):
Designed for cementing oil and gas wells, isolating salt deposits at bottomhole temperatures from 80 to 250 ° C and reservoir pressure up to 600 atm. Significantly differ from Portland cements in high heat resistance in relation to calcium chloride, sodium chloride, magnesium chloride and sulfate aggressive media.
- Backfill cement for cyclically changing temperatures of the TsTPN type (TU U 320.00136751.023-97):
Designed for casing wells operating using thermal methods of stimulating the formation with cyclic heating of the support up to 150 ° C. Also used at moderate to elevated bottomhole temperatures.
Full list of produced special cements:
- Cements, weighted for plugging, type CTU 1-100 according to
TUU 320.00136751.022-97
- Cements, weighted for plugging, type TsTU 2-100 according to
TUU 320.00136751.022-97
- Cements weighted slag backfill type UShTs 1-120 according to
TUU 320.00136751.010-96
- Weighted slag backfill cements UShTs 1-200 type according to
TU U 320.00136751.010-96
- Cements weighted slag backfill type UShTs 2-120 according to
TU U 320.00136751.010-96
- Weighted slag grouting cements UShTs 2-200 type according to
TU U 320.00136751.010-96
- Cements, lightweight backfill type TSTO 1.5-100 according to
TU U 320.00136751.021-97
- Slag-sand cements of the ShPTsS-120 type according to TU U 320.00136751.008-96
- Slag-sand cements of the ShPTsS-200 type according to TU U 320.00136751.008-96
- Backfill cement for cyclically changing temperatures, type TsTPN according to TU U 320.00136751.023-97
Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.
Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.
Packing: bag weighing 25 ± 1% kg.
The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.
Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.
Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.
Packing: bag weighing 25 ± 1% kg.
The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.
Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.
Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.
Packing: bag weighing 25 ± 1% kg.
The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.
Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.
Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.
Packing: bag weighing 25 ± 1% kg.
The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.
Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.
Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.
Packaging containers soft propylene type "big-bag" for single use weighing 1000 ± 1% kg
The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.
Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.
Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.
Packaging containers soft propylene type "big-bag" for single use weighing 1000 ± 1% kg
The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.
Modified bentonite powder is intended for the preparation and regulation of the properties of water-based drilling fluids, which are used when drilling water, oil and gas wells.
Solution characteristics:
- Minimum output of clay solution - 18 m3 / t;
- The remainder of particles with a diameter greater than 75 microns - no more than 2.5%;
- indicator of the scale of the viscometer - not less than 30º;
- The ratio of the yield point to plastic viscosity - no more than 6 units;
- Filtrate volume - no more than 16 ml.
Packaging containers soft propylene type "big-bag" for single use weighing 1000 ± 1% kg
The guaranteed shelf life of products is 12 months from the date of manufacture, subject to the rules of transportation and storage.
